In Stock

AZOO 230V EXTERNAL POWER FILTER

ر.ق 275.00

For Freshwater, Saltwater Aquariums

FEATURES:

  1. Powerful motor and ultra-quiet design for a silent, smooth operation.
  2. Large capacity of filter media with high efficiency output to increase filter volume for providing clean water quality at all times.
  3. Detachable water inlet/outlet design, easy installation and maintenance.
  4. Energy saving, environmentally friendly design, safe and reliable to use.
  5. Ideal for either hanging on the aquarium or placing on the table.

230V 36OL/H

AZOO - El líder en productos especializados de acuario

 

7 in stock

Categories: , , Brand:

Description

PRECAUTIONS:

1.  For safety use, please read the precautions carefully

and pay attention to labels on the product.

2.  Before first use, check if the Voltage is appropriate

for the filter. Make sure the power plug is secure and

the socket is not shared with other appliances.

3.  The filter drum must be filled with water before

plugged into power outlet.

Otherwise the motor can easily be damaged due to empty-running.

4.  Do not attempt to dismantle or repair the motor in the filter drum.

5.  If the power cord is damaged, please stop using the product.

6.  If plug socket position below the filter drum, please make

sure not to let the water come down along the power cord

reaching power socket.

7.  This filter is only suitable for indoor aquariums use.

Water temperature range 10℃~35℃; maximum height 60 CM.

8.  Ensure the unit is unplugged before installing or cleaning.

9.  For using in a new aquarium, please operate the unit for

one day before introducing fish into the aquarium.

 

INSTALLATION INSTRUCTIONS:

A. Hang-on the aquarium

B. Set on the table.

C. Refer to and for Installation.

 

(Filter media are included and loaded already in the filter drum)

A. For Hang-on the aquarium

1.  Water Inlet Pipes Installing:

Connect Elbow Connector (M), Nut (L), to Inlet Pipe (Q1, Q2);

and Inlet Net (Q3) (Refer to Parts Assembly Drawing).

Fix Water Inlet Pipes with Suckers (R) to Sucker Stand-Long

(S2) and attach to the aquarium wall in a proper place

as shown in Fig(2).

2.  Water Outlet Pipes Installing: Connect Elbow Connector (M),

Nut (L), TPR Elbow (Short) (N) to Rain Pipe (P1.2).Users can

choose to use either the Outlet Port (P3) or Rain Pipes (P)

for different water outlet effects. Fix Water Outlet Pipes

with Suckers (R) to Sucker Stand-short (S1) and attach to the

aquarium wall in a proper place as shown in Fig(2).

3.  Set Hanging Hooks (U1) on the aquarium wall in a proper place.

Fix Filter drum to the Hanging Hooks (U1) by Hanging

frame (U) as shown in Fig(3). Connect Water Inlet/Outlet

Pipes to filter drum with TPR Elbow (Long) (T) as shown in Fig(1).

(Please pay attention to the Water In & Out indications on the filter.)

4.  Fill in filter drum with water as shown in Fig(5) and then

plug in to start up the unit.

B.  For Stand on the table

1.  Assemble Water Inlet and Outlet pipes as shown and

explained in Fig(2) and in

A. For Hang-On the aquarium above.

2.  Connect Water Inlet/Outlet Pipes to filter drum with

60cm Soft Pipe (X). (Please pay attention to the

Water In & Out indications on the filter.) Fix the 60cm

Soft Pipe(X) with Curve Clip(Y) to adjust to a proper place

as shown in Fig(4).

C. Refer to and for Installation.

1.  Fill in filter drum with water as shown in Fig(5) and

then plug in to start up the unit.

 

MAINTENANCE:

1.  Use normal cloth to carefully wipe to clean the surface

of the unit. Never clean it with Gasoline of Cleanser.

2.  When there is unusual sound or high temperature appears

during the operation, please stop to use the unit.

3.  Regular cleaning and replacement of the filter media,

Active Carbon Pad(B2), Bio Sponge(B1), Bio Ring(W) is

necessary for better filtration results.

4.  Cleaning or Replacement of filters

4-1. Unplug the unit, removes Water Inlet and Outlet Pipes

(Be careful for the siphon effects) and then pull up Side

Clip(F2) and Clip (F1)

4-2. Press the hook as indicated in Figure(7) to take

apart Filter Lid(C)and Filter Cup(B) for cleaning or

replacing Active Carbon Pad(B2), Bio Sponge(B1), Bio Ring(W).

Dimension of Body 20×12.2×18.2cm

Capacity of Filter Chamber 2.0L
Diameter of Tube ψ12mm x ψ16mm
Suitable for Aquarium 40~60cm (40~80L)

NOTES:

The display color of the item and its packaging could differ from the
actual product due to uses’ monitors settings.

Reviews

There are no reviews yet.

Be the first to review “AZOO 230V EXTERNAL POWER FILTER”

Your email address will not be published.